Showing all 12 results
-
DURAuto FD Finish
Read moreDURAuto FD Finish
DURAuto FD Finish is a quick-drying, high gloss modified alkyd-acrylic enamel, especially for OEM and refinish industries.
-
Epoxy coal tar Finish
Read moreEpoxy coal tar Finish
Renowned high build coal tar epoxy polyamide for protection of steel and concrete in single or two-coat applications in a broad variety of aggressive industrial applications.
-
Epoxy DTM Finish
Read moreEpoxy DTM Finish
DTM is a polyamide curing, high solids epoxy paint. It forms a hard and tough coating, has good wetting properties and cures at low temperatures.
-
Epoxy GF Finish
Read moreEpoxy GF Finish
A glass-reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. It is self-priming. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the waterline) in marine applications where these resistance qualities are desired.
-
Epoxy HB Finish
Read moreEpoxy HB Finish
A combination of epoxy and polyamide resins with selected pigments designed specifically as a high chemical and corrosion resistance.
-
PU Finish
Read morePU Finish
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, It provides a smooth, durable finish that has superior resistance to corrosion, abrasion, and chemical exposure.
-
PU HB Finish
Read morePU HB Finish
Two-component, high solids acrylic aliphatic polyurethane finish. Finish coat for (anti-corrosive) coating systems on steel and concrete structures in atmospheric exposure conditions.
-
PU HS DTM Finish
Read morePU HS DTM Finish
A two-component, DTM urethane mastic, acrylic polyurethane finish providing anti-corrosion barrier protection and long term re-coatability.
-
SafeX Premium Finish
Read moreSafeX Premium Finish
SafeX series is a water reducible alkyd enamel. This product has an excellent balance of fast dry, tough film properties and economical and can be applied to properly prepared metal substrates. This material is formulated to meet strict air quality regulations.
-
SynPURE DTM Finish
Read moreSynPURE DTM Finish
SynPURE DTM is a single component, high solids, low VOC, modified alkyd finish. It is Direct to the metal coating which is replaced by multi-coat systems.
-
SynPURE Finish 1000 Series-Heavy Duty
Read moreSynPURE Finish 1000 Series-Heavy Duty
SynPURE 1000 Series is a high build finish for Heavy-duty applications. Use as topcoat where corrosion protection required.
-
SynPURE modified alkyd finish/SynPURE Premium Finish
Read moreSynPURE modified alkyd finish/SynPURE Premium Finish
SynPURE modified alkyd Paints are recommended as topcoat where mild corrosion and chemical resistance required.It can be used for both exterior and interior surfaces mainly on mild steel, wooden, and suitably prepared masonry surfaces.