Showing all 10 results
-
Epoxy Micaceous Coating
Read moreEpoxy Micaceous Coating
Epoxy Micaceous Coating is a low VOC, high solids, high build epoxy with pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop. A range of anticorrosive coating systems in a wide range of aggressive environments.
-
Epoxy Primer System
Read moreEpoxy Primer System
It is a two-component, polyamine adduct cured epoxy primer pigmented with anti-corrosive zinc phosphate and Zinc Chrome. Offers excellent resistance to corrosion and exceptional adhesion to ferrous substrates. Comply with the requirements of BS5493.
-
Epoxy Zinc HB Primer
Read moreEpoxy Zinc HB Primer
A two-component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low-temperature cure, and rapid overcoating properties.
-
HR Matt
Read moreHR Matt
Air-dried coating available in matt colors and suitable for high-temperature exposures up to 500°C. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments.
-
Hybrid Epoxy Zinc rich Primer
Read moreHybrid Epoxy Zinc rich Primer
It is a high performance two-component zinc-rich epoxy primer where extended durability and excellent corrosion protection are required.It is come up with different zinc percentage. Complies with SSPC-Paint 20 level 2 and ISO 12944.5
-
PU Finish
Read morePU Finish
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, It provides a smooth, durable finish that has superior resistance to corrosion, abrasion, and chemical exposure.
-
PU HB Finish
Read morePU HB Finish
Two-component, high solids acrylic aliphatic polyurethane finish. Finish coat for (anti-corrosive) coating systems on steel and concrete structures in atmospheric exposure conditions.
-
PU HS DTM Finish
Read morePU HS DTM Finish
A two-component, DTM urethane mastic, acrylic polyurethane finish providing anti-corrosion barrier protection and long term re-coatability.
-
SynPURE DTM Finish
Read moreSynPURE DTM Finish
SynPURE DTM is a single component, high solids, low VOC, modified alkyd finish. It is Direct to the metal coating which is replaced by multi-coat systems.
-
SynPURE modified alkyd finish/SynPURE Premium Finish
Read moreSynPURE modified alkyd finish/SynPURE Premium Finish
SynPURE modified alkyd Paints are recommended as topcoat where mild corrosion and chemical resistance required.It can be used for both exterior and interior surfaces mainly on mild steel, wooden, and suitably prepared masonry surfaces.